We’ll look at the type of wood you have, its current condition, and add your color considerations to help you make the right decision. Choosing a stain is the biggest decision you will have to make when staining your wood fence. If your wood fence is unfinished, consider staining it. Typically, depending on the exterior humidity, it should take 24-48 hours to get the moisture content of the wood low enough to begin staining. A good stain will be transparent and water-resistant, protecting the wood from moisture. A good quality stain will enhance the appearance of the wood, protect the fence from moisture and cracking and retain its colour for longer. If this were the case, plan on spending $10 to $17 per panel or up to $1.50 to $2.50 per linear foot of fence to be stained. Those who plan on doing the job on their own should be prepared to spend $25 to $45 per gallon of stain. Some professional suggest you stain rather than paint a fence. Use a paintbrush to catch drips and work paint into hard-to-reach areas.
Protect the area by putting down a drop cloth to catch debris, paint drips or overspray. Place a drop cloth below or next to the fence to catch debris, dripping paint or overspray. Collect and organize your projects all in one place! One board by one, start at the top and work your way down the bottom. If the fence has to be re-stained, all boards will be inspected, and if any of the boards have to be replaced, then either a new panel or board will be installed. Using the pad, brush or roller, dip it into the wood stain then apply it to your fence in an event coat, working your way from one fence board to the next. Brush off dirt, spider webs and debris. If there are rusty spots or the fence is generally rusty, scrape off loose rust with a wire brush before applying a rust-inhibiting metal primer with a roller or sprayer. You can also use a garden hose with a power nozzle, a scrub brush and a solution of detergent and water. Sponge any mold or mildew spots with a 50/50 solution of bleach and water to keep mold or mildew from growing back.
Think of a toner as a clear solution with a “tone” of cedar or redwood pigment added to it to give the wood some added color and protection. Clear a space to work before you get started. This type of specialized work should be done by a qualified fencing professional. This quality product from the TWP gives a professional look to the fence thus increasing its aesthetic value. Whether you want to stain it on your own or hire a professional contractor, a few factors need to be considered in order to figure out an estimate. Applying wood stain to the slats improves its design and prolongs the lifespan of your hard-working outdoor structure—a win-win! Why Stain a Wood Fence? Whether you have a wood or chain-link fence, a well-applied stain or paint job every few years will help your fence last longer and keep it looking great. Clean, scrape and sand your fence with medium-grit or fine-grit sandpaper before you paint. For most people, brushing and rolling fence stain is the way to go.
Once the fence is prepped and all of the boards are considered to be in good condition, the stain will be applied. If your fence is starting to look a little worn, now is a good time to paint or stain it. Don’t attempt to paint a vinyl-coated chain-link fence. They charge based upon the condition of the fence and stain you choose. Other companies may charge by the panel or linear foot. 0.35 per square foot to clean and stain a fence. 0.25 to $1 per square foot for a fairly straightforward job. 0.35 per square foot, according to their official price list. The average gallon can cover up to 300 square feet. There are many different colors and shades of stain that can protect your fence while giving it the color to compliment your home. Miss Lauchlan told the court that there had been a misunderstanding and that Mr Robinson had been comforting her. Before the fence is stained, a contractor will first clean and prep the area, which can take up to three days for the fence to dry. The cost will depend on the size of the job, the size of the fence, the prepping required, the contractor performing the job, the type of stain, and geographical location.
When it comes to applying a stain to a fence, you have the choice of brushes, rollers or pads. This is exactly where a wood stain works as a boon. Additional fees can apply if the wood has to be sanded down. X Research source – Clean or sand down any cedar that is dirty, stained or contaminated with mildew. The solvents in the lacquer go deep down into the wood grains and nourish them thus accentuating the beauty of the natural wood. A stain gives a uniform colour to the wood thus making it eye catching. The experts at Five Star Painting recommend stain due to its durability on wood exposed to the elements. The only alternative at this point is to tone the wood. A lot of people wonder of the stain getting into the pores of the wood as it can render it harmful. For watery stains, use a stain brush, which holds more finish with less dripping.